Browse Topic: Coatings, colorants, and finishes
To obtain real-time tire wear status during vehicle operation, this paper proposes a tire wear detection method based on signal analysis. Firstly, PVDF piezoelectric thin film sensors are pasted in the center of the airtight layer of tires with different degrees of wear to collect tire stress data under different working conditions. Secondly, filter and extract the time-domain and frequency-domain feature information of the collected data to construct a feature dataset. Finally, a deep regression model is established to train the feature dataset and achieve real-time detection of tire damage status. The results indicate that the prediction algorithm based on signal analysis and feature extraction achieves a maximum error of 0.3mm in tire wear detection, demonstrating high accuracy in tire wear detection. Providing tire information for safe driving of vehicles has high industrial application value.
This specification covers a zinc molybdate primer in the form of a liquid.
This specification covers the requirements for the application and properties of a titanium nitride coating on metal parts applied by physical vapor deposition (PVD).
Fused Deposition Modeling (FDM) is a highly adaptable additive manufacturing method that is extensively employed for creating intricate structures using a range of materials. Thermoplastic Polyurethane (TPU) is a highly versatile material known for its flexibility and durability, making it well-suited for use in industries such as footwear, automotive, and consumer goods. Hoses, gaskets, seals, external trim, and interior components are just a few of the many uses for thermoplastic polyurethanes (TPU) in the automobile industry. The objective of this study is to enhance the performance of Fused Deposition Modeling (FDM) by optimizing the parameters specifically for Thermoplastic Polyurethane (TPU) material. This will be achieved by employing a Taguchi-based Grey Relational Analysis (GRA) method. The researchers conducted experimental trials to examine the impact of key FDM parameters, such as layer thickness, infill density, printing speed, and nozzle temperature, on critical responses
Additive Manufacturing (AM), particularly Fused Deposition Modeling (FDM), has emerged as a revolutionary method for fabricating complex geometries using a variety of materials. Polyethylene terephthalate glycol (PETG) is a thermoplastic material that is biodegradable and environmentally friendly, making it a preferred choice in additive manufacturing (AM) due to its affordability and ease of use. This study aims to optimize the FDM settings for PETG material and investigate the impact of key process parameters on printing performance. An experimental study was conducted to evaluate the influence of crucial factors in FDM, including layer thickness, infill density, printing speed, and nozzle temperature, on significant outcomes such as dimensional accuracy, surface quality, and mechanical properties. The use of the Grey Relational Analysis (GRA) approach enabled a systematic assessment of multi-performance characteristics, facilitating the optimization of the FDM process. The findings
Additive Manufacturing (AM), specifically Fused Deposition Modeling (FDM), has transformed the manufacturing industry by allowing the creation of intricate shapes using different materials. Polylactic Acid (PLA) is a biodegradable thermoplastic that is commonly used in additive manufacturing (AM) because of its environmentally friendly nature, affordability, and ease of processing. This study aims to optimize the parameters of Fused Deposition Modeling (FDM) for PLA material using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) approach. The researchers performed experimental trials to examine the impact of important FDM parameters, such as layer thickness, infill density, printing speed, and nozzle temperature, on critical outcomes, including dimensional accuracy, surface finish, and mechanical properties. The methodology of design of experiments (DOE) enabled a systematic exploration of parameters. The TOPSIS approach, a technique for making decisions
A novel sintering method of bridging the two mechanically polished and oriented single-crystals together face-to-face in a non- environmental controlled atmosphere to fabricate the bicrystal substrate of NaCl of macroscopic thickness, with a common zone axis and having planarity over large areas, has been developed. Epitaxial [001] bicrystalline thin face-centered cubic (fcc) metal film of surface-reactive metal-containing tilt grain boundary across the interface is first grown in high vacuum directly by flash deposition on initially fabricated [001] oriented bicrystalline substrate of NaCl. The [001] tilt boundary, thus produced, and is examined by electron microscopy to characterize grain boundary morphology and structure. The findings of some preliminary investigations are then presented. A distinct atomic structure is observed for 310 and 210 inclination. Both HAADF-STEM and Diffraction images reveal that such fabricated high-angle grain boundary accommodates minor deviations from
This specification covers the requirements for a low-electrical-resistance chemical conversion coating on aluminum and aluminum alloy parts.
This specification covers requirements for a coating consisting of finely powdered molybdenum disulfide in a heat-resistant inorganic binder applied to parts.
This specification covers the engineering requirements for applying coatings to parts by the plasma spray process and the properties of such coatings.
Additive Manufacturing (AM), specifically Fused Deposition Modeling (FDM), has become a revolutionary technology for creating intricate shapes using different materials. Polylactic Acid (PLA) is a biodegradable thermoplastic that is commonly used in additive manufacturing (AM) because of its environmentally friendly properties, affordability, and ease of use. The objective of this study is to optimize the FDM parameters for PLA material and create predictive models using the Adaptive Neuro-Fuzzy Inference System (ANFIS) to forecast printing performance. An investigation was carried out through experimental trials to examine the impact of important FDM parameters, such as layer thickness, infill density, printing speed, and nozzle temperature, on critical outcomes such as dimensional accuracy, surface finish, and mechanical properties. The utilization of design of experiments (DOE) methodology enabled a methodical exploration of parameters. A predictive model using ANFIS was created to
Additive Manufacturing (AM), specifically Fusion Deposition Modeling (FDM), has transformed the manufacturing industry by allowing the creation of complex structures using a wide range of materials. The objective of this study is to enhance the FDM process for Thermoplastic Polyurethane (TPU) material by utilizing the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) optimization method. The study examines the influence of FDM parameters, such as layer height, nozzle temperature, and infill density, on important characteristics of the printing process, such as tensile strength, flexibility, and surface finish. The collection of experimental data is achieved by conducting systematic FDM printing trials that cover a variety of parameter combinations. The TOPSIS optimization method is utilized to determine the optimal parameter settings by evaluating each parameter combination against the ideal and anti-ideal solutions. This method determines the optimal parameter
Additive Manufacturing (AM), specifically Fused Deposition Modeling (FDM), has transformed the manufacturing industry by allowing the creation of intricate shapes using different materials. Polylactic Acid (PLA) is a biodegradable thermoplastic that is commonly used in additive manufacturing (AM) because of its environmentally friendly nature, affordability, and ease of processing. This study aims to optimize the parameters of Fused Deposition Modeling (FDM) for PLA material using the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) approach. The researchers performed experimental trials to examine the impact of important FDM parameters, such as layer thickness, infill density, printing speed, and nozzle temperature, on critical outcomes, including dimensional accuracy, surface finish, and mechanical properties. The methodology of design of experiments (DOE) enabled a systematic exploration of parameters. The TOPSIS approach, a technique for making decisions
The future of wireless technology - from charging devices to boosting communication signals - relies on the antennas that transmit electromagnetic waves becoming increasingly versatile, durable and easy to manufacture. Researchers at Drexel University and the University of British Columbia believe kirigami, the ancient Japanese art of cutting and folding paper to create intricate three-dimensional designs, could provide a model for manufacturing the next generation of antennas. Recently published in the journal Nature Communications, research from the Drexel-UBC team showed how kirigami - a variation of origami - can transform a single sheet of acetate coated with conductive MXene ink into a flexible 3D microwave antenna whose transmission frequency can be adjusted simply by pulling or squeezing to slightly shift its shape.
This specification establishes the requirements for dyed anodic coatings on aluminum alloys.
An ultrathin coating was developed that contradicts a physics phenomenon of materials related to thermal radiation: The hotter an object gets, the brighter it glows. The new coating is engineered from samarium nickel oxide, a unique tunable material. The coating “breaks” the relationship between temperature and thermal radiation; essentially, there is a temperature range within which the power of the thermal radiation emitted by the coating stays the same.
Butterflies can see more of the world than humans, including more colors and the field oscillation direction, or polarization, of light. This special ability enables them to navigate with precision, forage for food, and communicate with one another. Other species, like the mantis shrimp, can sense an even wider spectrum of light, as well as the circular polarization, or spinning states, of light waves. They use this capability to signal a “love code,” which helps them find and be discovered by mates.
From televisions to smartphones, organic light-emitting diodes (OLEDs) are finding their way into many everyday devices. For use in displays, blue OLEDs are also required to supplement the primary colors — red and green. Especially in blue OLEDs, impurities give rise to strong electrical losses, which could be partly circumvented by using highly complex and expensive device layouts.
This specification covers the requirements for black oxide coatings on parts.
Many performance sport passenger vehicles use drilled or grooved cast iron brake rotors for a better braking performance or a cosmetic reason. Such brake rotors would unfortunately cause more brake dust emission, appearing with dirty wheel rims. To better understand the effects of such brake rotors on particle emission, a pin-on-disc tribometer with two particle emission measurement devices was used to monitor and collect the emitted airborne particles. The first device was an aerodynamic particle sizer, which is capable of measuring particles ranging from 0.5 to 20 μm. The second device was a condensation particle counter, which measures and collects particles from 4 nm to 3 μm. The testing samples were scaled-down brake discs (100 mm in diameter) against low-metallic brake pads. Two machined surface conditions (plain and grooved) with uncoated or ceramic-coated friction surfaces were selected for the investigation. The results showed that the grooved friction surface led to a higher
A soft, flexible film senses the presence of nearby objects without physically touching them. The study features the new sensor technology to detect eyelash proximity in blink-tracking glasses.
Items per page:
50
1 – 50 of 5178